Pegasus Technologies    

The PTRF-433 Transceiver Module

Menu:

   Home
   RF Products
   About Us
   News
   Capabilities
   Qualifications
   Our Staff
   Sample Designs
   Facilities
   Business Philosophy
   Privacy
   Warranty
   Jim's Gems
   The Lighter Side
   Links
   Contact Us




Your Source for RF, Wireless, and SS Information!


Google


Search Site
Search Web
   
NOTE:If you are interested in this module, please call Jim Pearce at (865) 717-9339 . Availability is extremely limited. For information on our other transceiver modules, please see our RF Products page.

Introduction

The PTRF-433 operates in the 433 to 435 MHz band. Its design is based on the XEMICS XE1202 single chip transceiver and is capable of use in data transmission for narrowband FSK applications.

In addition to the XE1202, the module incorporates a SAW filter that is used for both transmitting and receiving, a high accuracy quartz crystal, a low-loss transmit/ receive switch and all of the carefully selected passive components necessary to get the highest performance from the XE1202.

The design is pre-certified to ETSI EN 300 220 and ETSI EN 301 489, and FCC part 15.231 regulations, which means that the testing that will need to be done on products incorporating this module will go much more smoothly than if you started from scratch with a design using the XE1202 integrated circuit.

The PTRF-433 works in systems with an external processor. Assistance in integration, customization, firmware development or modification, and certification is available from Pegasus Technologies.




Features
  • CE Pre-Certified Radio Design
  • Simple uP Interface
  • Low Cost Design
  • Production Ready
  • Bit Synchronizer
  • Programmable Power Output
  • Alignment Free
  • Optimized RF performance
  • Few External Components
  • Low Voltage / Low Current
  • Reduces Design Time for your
    wireless product
Applications
  • Home Automation
  • Process control
  • Security systems
  • Wireless data links
  • Home appliances
  • Wireless sensing
Specifications
  • Frequency: 433 to 435 MHz
  • Modulation: FSK
  • Programmable Data Rates: 4.8 kbps to 76.8 kbps
  • Output Power: 8 dBm
  • Receiver Sensitivity: -110 dBm, Typical (5kHz deviation, 4.8 kbps, 10-3 BER)
  • TX Current: 35 mA @ 8 dBm, typical
  • RX Current: 15 mA, typical
  • Supply Voltage 2.7 to 3.6 V
  • Regulatory Compliance: EN 300 220, EN 301 489, and FCC part 15.231
  • Temperature Range: -40 to +85 degrees C
  • Module Size: 52 mm x 29 mm
For a complete overview of the operation of this module, refer to the datasheet for the XE1202 transceiver integrated circuit.


Specifications subject to change without notice.


For a downloadable/printer friendly copy of this spec sheet, select one of the links below:


For pricing, see our RF Products page. For more information, email Sales@pegasustech.com or call Jim Pearce at (865) 717-9339.
 

Tel: 865-717-9339    ||   FAX: 865-717-9904    ||   E-Mail:
108 Pawnook Farm Road   ||    Lenoir City, TN 37771