Pegasus Technologies    

The PTRF-915 Transceiver Module

Menu:

   Home
   RF Products
   About Us
   News
   Capabilities
   Qualifications
   Our Staff
   Sample Designs
   Facilities
   Business Philosophy
   Privacy
   Warranty
   Jim's Gems
   The Lighter Side
   Links
   Contact Us




Your Source for RF, Wireless, and SS Information!


Google


Search Site
Search Web
   
NOTE:Availability of this module is limited. If you are interested in this module, please call Jim Pearce at (865) 717-9339. For information on the PTSS2003, an FCC and Canadian certified 902-928 MHz transceiver module that is available in 250mW and 10 mW power output versions, please see our RF Products page.

Introduction

The PTRF-915 operates in the 902 to 928 MHz band. Its design is based on the XEMICS XE1202 single chip transceiver and is capable of use in data transmission for both narrowband FSK and FHSS applications.

In addition to the XE1202, the module incorporates a SAW filter that is used for both transmitting and receiving, a high accuracy quartz crystal, a low-loss transmit/ receive switch and all of the carefully selected passive components necessary to get the highest performance from the XE1202.

The design is pre-certified to FCC Part 15.247 and Part 15.249 regulations, which means that the testing that will need to be done on products incorporating this module will go much more smoothly than if you started from scratch with a design using the XE1202 integrated circuit.

The PTRF-915 works in systems with an external processor. A firmware license is available for FHSS operation. Assistance in integration, customization, firmware development or modification, and certification is available from Pegasus Technologies.




Features
  • FCC Pre-Certified Radio Design
  • Reverse-Polarity SMA Connector
  • Digital Radio uP Interface
  • Low Cost Design
  • Production Ready
  • Bit Synchronizer
  • Programmable Power Output
  • Alignment Free
  • FHSS Algorithm Available For License
  • Optimized RF performance
  • Few External Components
  • Low Voltage / Low Current
  • Reduces Design Time for your
    wireless product
Applications
  • Home Automation
  • Process control
  • Security systems
  • Wireless data links
  • Home appliances
  • Wireless sensing
Specifications
  • Frequency: 902 to 928 MHz
  • Modulation: FSK (supports FHSS)
  • Programmable Data Rates: 4.8 kbps to 76.8 kbps
  • Output Power: 11 dBm
  • Receiver Sensitivity: -111 dBm, Typical (5kHz deviation, 4.8 kbps, 10 -3 BER)
  • TX Current: 48 mA @ 11 dBm
  • RX Current: 16 mA
  • Supply Voltage 2.7 to 3.6 V
  • FCC Compliance: Per Part 15.247 & Part 15.249 (using Nearson antenna part # C321 AH-925)
  • Temperature Range: -40 to +85 degrees C
  • Module Board Size 1.1.02" x 2.216" x 0.315" (2.8 cm x 5.4 cm x 0.8 cm)
  • Weight: 0.6 oz. (18.662 g)
For a complete overview of the operation of this module, refer to the datasheet for the XE1202 transceiver integrated circuit.


Specifications subject to change without notice.


For a downloadable/printer friendly copy of this spec sheet, select one of the links below:


For pricing, see our RF Products page. For more information, email Sales@pegasustech.com or call Jim Pearce at (865) 717-9339.
 

Tel: 865-717-9339    ||   FAX: 865-717-9904    ||   E-Mail:
108 Pawnook Farm Road   ||    Lenoir City, TN 37771